IBM RS/6000 7043 43P manual Begin, Safety, Are

Before You	Begin
Ÿ Make	sure you have the proper			type and level of	operating	system sup
your system unit. The Model 140				and Model 240 support AIX Versions 4.1
later. The Model 150 supports AIX Versions 4.2.1					or 4.3.2	and later.
unsure about		whether	or not an	operating system is supported on your
unit,	please	call your	marketing	representative.

ŸYour system unit has a voltage-selection switch. Make sure you know the correct voltage setting for your country (the U.S. and Canada use th setting). If you are not sure of the voltage setting for your country

authorized reseller or marketing representative.

Ÿ Make	sure you have an adequate number	of properly	grounded electrical
for	your system unit, display, and any	other options	you intend to ins

ŸPlace your system unit in a location that is dry. Rain or spilled liqui

damage your system unit.

Ÿ	Leave	about 50		mm (2 in.)	of	space	around the system unit to allow th
	system	to	work	properly.
Ÿ	Collect	the	following tools		and	keep	them handy:

– Small flat-blade screwdriver

–Medium flat-blade screwdriver

–Trays to hold screws.

Safety		Note:	Before	continuing,			referSystemto Unithe
Safety		Information	book		for	Danger		and Caution	notices.
Do not		plug	any cables into the system unit, adapters,
electrical			outlets	until		you	have	reviewed	this informat
Make	sure none		of the power		cords	are	connected
before	continuing.

1-27043 43P Series User's Guide