iCE & WATER

Icemaker

is not

Refrigerator was

recently installed

or

making

ice.

icemaker

recently

connected,

 

 

 

Icemaker

not

turned on.

 

 

 

The ice detecting sensor is obstructed.

 

 

The refrigerator

is not connected

to

 

 

a water supply or the supply shutoff

 

 

valve is not turned on.

 

Icemaker shutoff (arm or sensor) obstructed.

It may take up to 24 hours for each compartment to reach the desired temperature and for the icemaker to begin making ice.

Locate the icemaker ON/OFF switch and confirm that it is in the ON (I) position.

Foreign substances or frost on the ice-detecting sensor can interrupt ice production. Make sure that the sensor area is clean at all times for proper operation.

Connect refrigerator to the water supply and turn the water shutoff valve fully open.

If your icemaker is equipped with an ice shutoff arm, make sure that the arm moves freely. If your icemaker is equipped with the electronic ice shutoff: sensor, make sure that there is a clear path between the two sensors.

Reverse osmosis water filtration system is connected to your cold water supply.

Not dispensing water. New installation or water line recently connected.

Reverse osmosis filtration systems can reduce the water pressure below the minimum amount and result in icemaker issues. (Refer to the Water Pressure section.)

Dispense 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminates from the system. Do not dispense the entire 2.5 gallon amount continuously. Depress and release the

dispenser pad for cycles of 30 seconds ON and 60 seconds OFF.

The dispenser panel is locked.

The dispenser is not set for water dispensing,

Refrigerator or freezer doors are not closed properly,

Water filter has been recently removed or replaced.

Press and hold the Lock button for three seconds to unlock the control panel and dispenser.

The dispenser can be set for ice or water. Make certain that the control panel is set for the proper operation. Press the Water button on the control panel to dispense water.

Water will not dispense if any of the refrigerator doors are left open.

After the water filter is replaced, dispense 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminates from the system. Do not dispense the entire 2.5 gallon amount continuously.

Depress and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF.

Tubing

connecting

refrigerator to

The tubing

can kink when the refrigerator

is moved

house

supply valve

is kinked.

during

installation or cleaning

resulting in

reduced

 

 

 

water

flow.

Straighten or repair

the water

supply line

and arrange it to prevent future kinks.

The house water supply is notConnect refrigerator to the water supply and turn the connected, the valve is not turned on water shutoff valve fully open.

fully, or the valve is clogged.

If the problem persists, it may be necessary to contact a plumber.

4O

Page 39 Page 41
Page 40
Image 40
Kenmore 795.7202 manual Water supply or the supply shutoff, Connecting, Supply valve, Supply line
Page 39 Page 41

795.7202 specifications

The Kenmore 795.7202 refrigerator stands out in the arena of modern appliances, embodying a blend of innovative technology and user-centric design. This French door refrigerator is designed to offer convenience and efficiency, while also enhancing the aesthetics of any kitchen space.

One of the main features of the Kenmore 795.7202 is its spacious interior, a hallmark of French door models. With ample storage capacity, it allows for the easy organization of groceries and other food items. The refrigerator includes adjustable shelves that can accommodate tall items and keep frequently used items within reach. The clear drawers and tempered glass shelves make it easy to find what you need without rummaging through the contents, promoting a hassle-free cooking experience.

A notable technology embedded in the Kenmore 795.7202 is the SmartSense temperature management system. This technology utilizes advanced sensors to maintain optimal cooling throughout the refrigerator and freezer compartments, ensuring that food stays fresh for longer. Additionally, the dual evaporator system helps prevent the mixing of air between the fridge and freezer, minimizing odors and maintaining the quality of your food.

Energy efficiency is another defining characteristic of the Kenmore 795.7202. It is Energy Star certified, meaning it meets strict energy efficiency guidelines set by the Environmental Protection Agency. This not only helps reduce your carbon footprint but also translates into savings on energy bills.

The refrigerator also features a sophisticated water and ice dispenser. The external dispenser provides easy access to both crushed and cubed ice as well as chilled water, encouraging healthy hydration habits without having to open the fridge door. Furthermore, the filtration system ensures that the water is clean and safe, providing families with peace of mind.

With its sleek stainless steel finish, the Kenmore 795.7202 is designed to complement the modern kitchen. It features a modern, easy-to-use control panel that allows users to adjust temperatures and settings effortlessly. The LED interior lighting illuminates the contents, making it simple to find food items even in low lighting conditions.

Overall, the Kenmore 795.7202 refrigerator combines practicality with cutting-edge technology, making it an ideal choice for those seeking a reliable appliance that enhances kitchen efficiency. With its stylish design and array of features, it not only simplifies meal preparation but also enriches the culinary experience. Whether for a family or a single professional, this refrigerator meets the diverse demands of modern living.
Top Page Image Contents