LIGHT BULB REPLACEMENT
Electrical Shock Hazard
Before replacing a
NOTE: The refrigerator compartment lights Have LED interior lighting, and service should be performed by a qualified technician.
CHANGE FREEZER COMPARTMENT LIGHT BULB
1.Unplug refrigerator power cord form outlet.
2.Remove the screw using a Phillips screwdriver.
3.Grasp the light cover and pull the cover downward.
A_, CAUTION: Make sure that the bulb is cool to the touch.
4.Rotate the bulb counterclockwise to remove.
5.Replace with a new 60=watt appliance bulb.
6.Insert tabs on back of cover into slots in freezer ceiling. Push cover up to snap front into place.
7.Tighten the screw using a Phillips screwdriver.
/
POWER INTERRUPTIONS
1.if the power will be out for 24 hours or less, keep all refrigerator doors closed to help foods stay cold and frozen.
2.If the power will be out for more than 24 hours, remove
all food and store it in a different refrigerator or frozen food locker.
WHEN YOU GO ON VACATION
If you choose to leave the refrigerator on while you are away, follow these steps to prepare your refrigerator before you leave.
1.Use up any perishables and freeze other items.
2.Turn off the icemaker and empty the ice bin.
If you choose to turn the refrigerator off before you leave, follow these steps.
lo Remove all food from the refrigerator.
2.Depending on your model, set the thermostat control
(refrigerator control) to OFF. See the Setting the Controls section.
oClean the refrigerator, wipe it and dry well.
4.Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up.
WHEN YOU MOVE
When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.
1.Remove all food from the refrigerator and pack all frozen food in dry ice.
2.Unplug the refrigerator.
3.Clean, wipe and dry thoroughly.
4.Take out all removable parts, wrap them well and tape them together so they do not shift and rattle
during the move. Refer to the Using your Refrigerator section for removable instructions.
5.Depending on the model, raise the front of the refrigerator so it rolls easier OR screw in the leveling legs all the way so they do not scrape the floor. See the Door Closing section.
6.Tape the doors shut and tape the power cord to the refrigerator cabinet.
When you get to your new home, put everything back and
refer to the Refrigerator Installation section for preparation instructions.
32
