RelnstaiilngtheRefrigeratorDoor
Left Door
1.Lower the door onto middle hinge pin (10).
2.Fit top hinge (7) over hinge lever latch (8) and into place. Rotate lever (6) clockwise to secure hinge.
3.Install the grounding screw (5) and connect the two wire harnesses (4).
4.Push the water tube (3) located at the top of the left door into the hole beside the left hinge on the top of the cabinet until it exits through the back.
5.Insert the water supply tube (3) into the connector until you see only one scale mark. Fully insert the tube over
5/8 in. (15 mm).
6.Hook tabs on left side of hinge cover (1) under the edge of the top hinge (7) and position the cover in place. Insert and tighten the cover screw (1).
(3),
/
/
(8)
CAUTION
Collet
Tube
Scale Mark
Clip
Right Door
1.Lower the door onto middle hinge pin (9).
2.Fit top hinge (6) over hinge lever latch (7) and into place. Rotate lever (5) counterclockwise to secure hinge.
3.Install the grounding screw (4) and connect wire harnesses (3).
4.Hook tab on switch side of corner under edge of wire opening in cabinet top. Position cover (2) into place. Insert and tighten cover screw (1).
After inserting, pull the tube to make sure that it is secure and
reinsert the clip.
14
