SETTING THE CONTROLS
Temperature
Filter Reset
When the water filter indicator turns on, you have to change the water filter. After changing the water filter, press and hold the Filter Reset button for three seconds to turn the indicator light off. You need to change the water filter approximately every six months.
Dispenser Light
The Refrigerator Temp Control ranges from 33°F to 46°F (O°C to 8°C). Press the Refrigerator Temp button
to cycle through the available temperature settings one increment at a time.
The Freezer Temp Control range is from
cycle through the available temperature settings one increment at a time.
NOTE: When changing control settings, wait 24 hours before making additional adjustments. The controls are set correctly when milk or juice is as cold as you would like and when ice cream is firm. If the temperature in either compartment is too cold or too warm, change the setting one increment at a time. Wait 24 hours for the change to stabilize before adjusting again.
Ultra ice
When you press the Ultra Ice button, the Ultra Ice graphic will illuminate in the display and will continue for 24 hours. The function will automatically shut off after 24 hours.
You can stop this function manually by touching the button one more time.
This function increases both ice making and freezing capabilities.
Dispenser
Press the Ice & Water button to select either Water, Cubed ice or Crushed ice. The selected option will illuminate.
Some dripping may occur after dispensing. Hold your cup beneath the dispenser for a few seconds after dispensing to catch all of the drops.
NOTE: The dispenser will not work if any door is left open or if the control lock is engaged.
CAUTION: The control display is operated by touch. Excessive moisture on the display may cause a malfunction. Please keep the display clean and dry.
To turn the dispenser light on and off press the Light button.
Door Alarm
When power is connected to the refrigerator, the door alarm is initially set to ON. When you press and hold the Door Alarm button, the display will change to OFF and the Door Alarm function will deactivate.
When either the refrigerator or the freezer door is left open for more than 60 seconds, the alarm tone will sound to let you know that the door is open.
When you close the door, the door alarm will stop.
Control Lock
When power is initially connected to the refrigerator, the Control Lock function is off.
if you want to activate the Control Lock function to lock other buttons, press and hold the Door Alarm button for approximately three seconds. The Lock (ON) icon will display and the Control Lock function is now enabled.
When the Control Lock function is activated, no
other buttons will work. The dispenser pad is also deactivated.
To disable the Control Lock function, press and hold the
Door Alarm button for approximately three seconds.
18
