Sharp AR-5520N, AR-5516N Automatic TWO-SIDED Copying, Bypass tray can only be, Used when making

AUTOMATIC TWO-SIDED COPYING

Two originals placed on the document glass can be copied onto each side of a single sheet of paper. In addition, an RSPF can be used to copy two originals onto one sheet of paper, or one two-sided original onto two sheets of paper, or one two-sided original onto each side of one sheet of paper.

				Original → Paper		Usable paper
		One-sided original → Two sides
Document						A5 to A3
glass						• The bypass tray cannot be
						used.
	One-sided original		Two-sided original		Two-sided original	A5, B5, B5R, A4, A4R, B4, A3
	→ Two sides		→ One side		→ Two sides	• Special paper cannot be
RSPF						used.
						• The bypass tray can only be
						used when making
						one-sided copies from
						two-sided originals.

•To use paper in the bypass tray, make a two-sided copy as explained in "TWO-SIDED COPYING USING THE Note BYPASS TRAY" (p.26).

•When performing automatic two-sided copying of a one-sided original, or one-sided copying of a two-sided original, the image on the back can be rotated 180 degrees to reverse the top and bottom (Image rotation in duplex copying). To rotate the image 180 degrees, enable the setting as explained in "IMAGE ROTATION IN DUPLEX COPYING" (p.25) or in the system settings (p.69), and then follow the steps below. In particular, when a one-sided vertical (portrait) original is placed in a horizontal orientation (B4 or A3 size) for two-sided copying, the top and bottom of the images on the front and back of the paper will be reversed, and thus this function can be conveniently used to make the top and bottom of the images agree.

2

B4 or A3 portrait original

Normal automatic	If the orientation of
	two-sided copying
two-sided copying
	is changed

1

2

1

Orientation of the placed original

The top and bottom of	The top and bottom of the
the images on the front	images on the front and
and back are reversed.	back are the same.

23