76
USER SETTINGS

Resetting account

(program No.15)

The copy count of a single account or all accounts can
be reset to 0. If no account numbers have been
established, the error code "15E" will appear in the
display.
[Resetting all accounts]
Press the [1] key and then press the [START]
key ( ).
The copy counts of all accounts will be deleted.
[Resetting a single account]
1 Press the [0] key, and then press the
[START] key ( ).
2 Select the account number to be reset with
the [Copy ratio display] key ( ) and
then press the [START] key ( ).

Copying when "Auditing mode" is

enabled

When "Auditing mode" is enabled, "- - -" appears in the
display.
1Enter your 3-digit account number

with the numeric keys.

When you enter your account number, "0"
appears in the display to indicate that copying is
possible.
2Follow the appropriate steps to make

the copy.

3When finished, press the [ ] key

().

To reset another account number, enter the
program number (15) for account number
deletion and then repeat the procedure for
"Resetting a single account".
Note
If you enter an incorrect number, press the
[CLEAR] key ( ) and then enter the correct
number.
If you are performing an interrupt copy (p.28),
be sure to press the [INTERRUPT] key ( )
when finished to exit interrupt mode.
If a misfeed occurs or the paper runs out
during copying, your session will not end even
if the [ ] key ( ) is pressed.
Note
Note
ACC.#-C
Note
ACC.#-C