30
COPY FUNCTIONS
Using the document glass
1Place the first original. (p.15)
2Select the original size. (p.15)
3Press the [SORT/GROUP] key
( / ) to select the desired
mode.
The modes are selected
in the order "SORT"
( ), "GROUP"
( ), "Off".
4Set the number of copies and other
settings, and then press the [START]
key ( ).
The ORIGINAL DATA indicator ( ) blinks,
and the original is scanned into memory.
5When the start indicator lights,
replace the original with the next
original, and then press the [START]
key ( ).
Repeat step 5 until all originals have been
scanned into memory.
6When all originals have been
scanned, and then press the
[READ-END] key ( ).
The copies are delivered to the paper output tray.
Using the RSPF
1Place the originals. (p.16)
Sort mode is normally the default output mode,
and thus the RSPF and SORT indicators light up.
2Press the [SORT/GROUP] key
( / ) to select the desired
mode.
The modes are selected
in the order
"SORT"( ),
"GROUP" ( ), "Off".
3Set the number of copies and other
settings, and then press the [START]
key ( ).
The copies are delivered to the paper output tray.
If the memory becomes full
• If the memory becomes full while scanning the
originals, the ORIGINAL DATA indicator ( )
will blink, "FUL" will appear in the display, and the
machine will stop copying.
• To copy the originals that have been scanned up
to that point, press the [START] key ( ).
• To clear the data that has been scanned into
memory, press the [CLEAR ALL] key ( ) or the
[CLEAR] key ( ).
If the paper output tray becomes full
When the maximum number of pages (about 250
pages) that can be held in the paper output tray
are output, copying will temporarily stop. When this
happens, promptly remove the copies and press
the [START] key ( ) to resume copying.
To clear the data in memory, press the
[CLEAR] key ().
• To cancel the Sort/Group copy job, press
the [CLEAR] key ().
• To cancel Sort or Group mode, press the
[SORT/GROUP] key ( / )
repeatedly until the SORT/GROUP
indicators ( / ) are both off.
DATA
Note
Note
• If "Sort auto select" has been set to "1:
OFF" in the system settings, follow the
steps below to select sort mode.
• "Sort auto select" can also be used to
change the default output mode (p.71).
• To cancel the Sort/Group copy job, press
the [CLEAR] key ().
• To cancel Sort or Group mode, press the
[SORT/GROUP] key ( / )
repeatedly until the SORT/GROUP
indicators ( / ) are both off.
Note
Note
DATA