Sharp AR-5516N, AR-5520N - page 73

71

USER SETTINGS

5

*1When the RSPF is installed.

*3AR-5516N is as follows:

1: Upper tray (factory default),

2: 250-sheet paper feed unit/Upper paper tray of 2 x 250-sheet paper feed unit,

3: Lower paper tray of 2 x 250-sheet paper feed unit,

5: Bypass tray

24 Memory allocated to

printer mode

1: 30%

2: 40%

3: 50%

4: 60%

5: 70%

• Use this to change the proportion of machine

memory used for printer mode.

25 Key auto repeat 0: OFF

1: ON

• Use this sett ing to select whether or not

holding down a key causes repeated input of

the key. For keys that normally cause a set

value to increase when held down (for

example, holding down the [ZOOM] key ( ,

)), this program can be used to have the

set value not change when the key is held

down.

26 Key press time

1: Minimum

(current response

speed)

2: 0.5 sec.

3: 1.0 sec.

4: 1.5 sec.

5: 2.0 sec.

• Use this setting to select how long a key must

be pressed for the input to be accepted. By

selecting a longer time, you can prevent

settings from being changed by the accidental

pressing of a key.

27 Audible signals volume

1: Short beep

2: Long beep

3: OFF

• This sets the volume of beep signals. (p.72)

28 Base setting beep

signal

0: OFF

1: ON

• Use this to sound a beep when a base setting

is selected. (p.72)

29 Number of copies limit 1: 99 copies

2: 999 copies

• Use this se tting to select 99 or 999 for the

maximum number of copies.

30 Use close paper size 0: OFF

1: ON

• When this function is enabled, printing in

printer mode will automatically continue using

a different size of paper if the specified size of

paper runs out in all trays. This feature does

not function in copy mode.

31 Default tray setting

*3

1: Upper paper tray

2: Lower paper tray

3: 250-sheet paper

feed unit/

Upper paper tray of 2

x 250-sheet paper

feed unit

4: Lower paper tray of 2

x 250-sheet paper

feed unit

5: Bypass tray

• Use this program to select a default tray. This

tray is automatically selected each time the

power is turned on or each time the machine

reverts to the initial settings.

32 Default exposure

mode

1: AUTO

2: TEXT

3: PHOTO

• Use this program to set "AUTO", "TEXT", or

"PHOTO" as the default exposure mode.

34 Sort auto select

*1

1: OFF

2: Sort

3: Group

• Use this se tting to select the default output

mode for copying from the RSPF.

Program

number Program name

Setting codes

(factory default setting

appears in bold)

Explanation

Contents

Main Page CONTENTS 1 2 3 4 5 6 7 8 PERIPHERAL DEVICES AND SUPPLIES INTRODUCTION 1 BEFORE USING THE MACHINE PART NAMES AND FUNCTIONS Warning OPERATION PANEL Page POWER ON AND OFF POWER ON Turn the power switch to the "ON" position. POWER OFF Power save modes LOADING PAPER PAPER Special papers LOADING PAPER Loading the paper tray 1 until it stops. 2 1 paper width. 2 3 the way into the bypass tray. CHANGING A TRAY'S PAPER SIZE SETTING 1 ( ) for more than 5 seconds to set the selected paper size. 2 3 select the paper size. Changing bypass tray's paper size setting Customise the bypass tray setting 4 OPERATION IN COPY, PRINTER, AND SCANNER MODES Chapter 2 COPY FUNCTIONS NORMAL COPYING Copying from the document glass 1 place the original. 1 been left on the document glass. Close the RSPF. 2 of the original(s). 3 Auto paper select mode (when there are two or more paper trays) Removing the document cover Copying books or originals with folds or creases Originals that can be used in the RSPF Originals that cannot be used in the RSPF MAKING A COPY DARKER OR LIGHTER Original types 1 ( / / ) to select the original type. 2 REDUCTION/ENLARGEMENT/ZOOM AUTOMATIC RATIO SELECTION 1 feeder tray or on the document glass. If the original is placed on the document glass, select the original size. (p.15) MANUAL RATIO SELECTION 1 feeder tray or on the document glass. If the original is placed on the document glass, select the original size. (p.15) 3 SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEP ARATEL Y 1 2 3 4 6 7 8 AUTOMATIC TWO-SIDED COPYING 1 3 5 4 6 1 2 3 IMAGE ROTATION IN DUPLEX COPYING 1 key until the indicator blinks. 2 setting code. TWO-SIDED COPYING USING THE BYPASS TRAY 1 2 3 without changing the position of the edge closest to you, insert it in the bypass tray. DUAL PAGE COPYING 1 2 3 4 INTERRUPTING A COPY RUN (Interrupt Copying) 1 2 3 CONVENIENT COPY FUNCTIONS ROT ATING THE IMA GE 90 DEGREES SORT COPY/GROUP COPY 1 3 4 5 6 1 2 3 COPYING MULTIPLE ORIGINALS ONTO A SINGLE SHEET OF PAPER 1 6 3 ( / ) to select the desired mode. 1 2 ( / ) to select the mode. 3 Set the number of copies and other settings, and press the [START] key ( ). If the memory becomes full A AA ERASING SHADOWS AROUND THE EDGES OF A COPY 1 2 document glass, select the original size. (p.15) 3 select the desired erase mode. PRINTER FUNCTIONS BASIC PRINTING 1 on the operation panel is lit. 2 OPENING THE PRINTER DRIVER FROM THE "Start" BUTTON 1 "Control Panel" and then select "Printer". 2 driver icon. PRINTER DRIVER SETTING SCREEN SETTING ADVANCED PRINT FUNCTIONS 3 PRINTING MULTIPLE PAGES ON ONE PAGE (N-Up Printing) FITTING THE PRINTED IMAGE TO THE PAPER (Fit To Paper Size) 3 1 2 ENLARGING/REDUCING THE PRINT IMAGE 1 ABCD ABCD 2 3 ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE 1 ADDING A WATERMARK TO PRINTED PAGES 2 driver setup screen. TWO-SIDED PRINTING driver setup screen. 2Select "2-Sided(Book)" or "2-Sided(Tablet)". SAVING FREQUENTLY USED PRINT SETTINGS SAVING SETTINGS A T THE TIME OF PRINTING (User Settings) 1 2 SCANNER FUNCTIONS SCANNING OVERVIEW OUTLINE OF SC-Scan A "Device server" tab "Favorites" tab CONNECTING TO AND DISCONNECTING FROM THE SCANNER FUNCTION USING SC-Scan A 1 2 3 SCANNING USING THE KEYS ON THE MACHINE Scanning from the operation panel of the machine 1 2 3 OUTLINE OF BUTTON MANAGER BUTTON MANAGER SETTINGS 1 2 3 4 SCANNING FROM YOUR COMPUTER SCANNING FROM A TWAIN-COMPLIANT APPLICATION 1 2 application, click the "File" menu and select a menu to scan. 7 8 Scanner driver settings Set-up screen Preview screen SCANNING FROM A WIA-COMPLIANT APPLICATION (Windows XP/Vista) 1 2 menu and select "From Scanner or Camera". 3 SCANNING FROM THE "Scanner and Camera Wizard" (Windows XP) 1 2 3 4 5 USER SETTINGS ADJUSTING THE AUTOMATIC EXPOSURE LEVEL 1 2 3 ABOUT THE WEB PAGE HOW TO ACCESS THE WEB PAGE 1 computer. 2 MONITORING THE STATUS OF THE MACHINE ("Status" TAB) "Printer Status" window "System Status" window CONFIGURING THE NETWORK SETTINGS ("Network Settings" TAB) "Network Settings" window Page "SNMP Configuration" window "Filter Configuration" window Page "Port Configuration" window MANAGING THE SYSTEM INFORMATION ("System Information" TAB) "System Information" window "Password" window "Reset" window CUSTOMISING SETTINGS (System Settings) SYSTEM SETTINGS Page Page SELECTING A SETTING FOR A SYSTEM SETTING 1 the alarm indicators ( , , , , ) blink. 2 numeric keys. SETTINGS FOR AUDITING MODE AUDITING MODE AUDITING MODE SETTINGS SELECTING AUDITING MODE SETTINGS 1 2 4 5 Auditing mode (program No.10) Account number entry (program No.11) Account number change 1 with the numeric keys. 2 the copy. 3 TROUBLESHOOTING TROUBLESHOOTING MACHINE/COPYING PROBLEMS PRINTING AND SCANNING PROBLEMS MACHINE/COPYING PROBLEMS Page Page PRINTING AND SCANNING PROBLEMS Page Page Page NETWORKING FAQ Page Page Page Page INDICATORS AND DISPLAY MESSAGES MISFEED REMOVAL MISFEED IN THE RSPF 1 Section A Section B MISFEED IN THE BYPASS TRAY 1 Gently pull the misfed paper out. 2 MISFEED IN THE MACHINE 1 A. Misfeed in the paper feed area 2 3 1 2 3 4 5 1 2 3 MISFEED IN THE UPPER PAPER TRAY 1 and remove the misfed paper. 2 3 MISFEED IN THE LOWER PAPER TRAY 5 1 2 3 REPLACING THE TONER CARTRIDGE 1 2 3 4 7 ROUTINE MAINTENANCE CHECKING THE TOTAL OUTPUT COUNT AND TONER LEVEL CHECKING THE TOTAL OUTPUT COUNT [Total output count] CHECKING THE TONER LEVEL 1 3 ROUTINE MAINTENANCE CLEANING THE DOCUMENT GLASS AND RSPF/DOCUMENT COVER cleaner. 2Clean the original scanning glass with CLEANING THE ORIGINAL SCANNING GLASS (ONLY WHEN AN RSPF IS INSTALLED) 1 CLEANING THE BYPASS TRAY PAPER FEED ROLLER CLEANING THE TRANSFER CHARGER 7 1 2 3 4 Page Chapter 8 PERIPHERAL DEVICES AND SUPPLIES PERIPHERAL DEVICES REVERSING SINGLE PASS FEEDER Specifications 250-SHEET PAPER FEED UNIT/2 X 250-SHEET PAPER FEED UNIT Part names STORAGE OF SUPPLIES PROPER STORAGE Store the supplies in a location that is: Store paper in the wrapper and lying flat. GENUINE SUPPLIES