SUPER MICRO Computer 1.2b user manual Bios Error Beep Codes, Beep Code Error Message Description

Appendix A: BIOS POST Error Codes

Appendix A

BIOS Error Beep Codes

During the POST (Power-On Self-Test) routines, which are performed each time the system is powered on, errors may occur.

Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process. The error messages normally appear on the screen.

Fatal errors will not allow the system to continue the boot-up procedure. If a fatal error occurs, you should consult with your system manufacturer for possible repairs.

These fatal errors are usually communicated through a series of audible beeps. The numbers on the fatal error list correspond to the number of beeps for the corresponding error.

A-1 BIOS Error Beep Codes

BIOS Error Beep Codes

Beep Code

Error Message

Description

1 beep

Refresh

Circuits have been reset. (Ready to power up)

5 short beeps + 1 long beep

8 beeps

Continuous High (pitch)

+ Low (pitch) (siren-like)

Memory error

Display memory read/write error

System Overheat

No memory detected in the system

Video adapter missing or with faulty memory

System Overheat

A-1