Krell Industries S-1000 manual Saving Customized, Settings, Recalling, Restoring, Factory Default

Saving and Recalling Customized Settings and Restoring the Factory Default System Settings

SAVING CUSTOMIZED	To save the customized settings that you have entered, press and
SETTINGS	hold the save button (25) for approximately four seconds. The front
	panel displays SAVING SETUP while the settings are being stored in the
	nonvolatile memory of the S–1000 Surround Preamp/processor.
RECALLING	To retrieve your system’s saved settings, press and hold the recall
CUSTOMIZED	button (27) for approximately four seconds. The front panel displays
SETTINGS	RECALL SETUP while the settings are being retrieved from the non-
	volatile memory of the S–1000. Any settings that have been saved
	will be available through recalling system setup.
RESTORING	To replace all system settings with the factory default settings, follow
THE FACTORY DEFAULT	these steps:
SYSTEM SETTINGS	1. Press the front panel power button or power pre key (1) to put
	your system into the operational mode.
	2. Simultaneously press the recall button (27) and the power button or
	pre key (1). The front panel first displays:
	RECALL SETUP
	and then the front panel displays:
	S–1000
	VERSION 1.0
	60 HZ
	Customized settings for the S–1000 revert to the factory default set-
	tings.
Note	If you save your settings, they are still in memory after you restore the factory
	default system settings. Follow Recalling Customized Settings above to
	retrieve your customized settings.

Krell S-1000 57