Krell Industries S-1000 manual Power Connections Comm Port RS-232 Connector, 55 RC-5, 57 DB 25 Out

Back Panel Description, continued

	53 HDMI™ Inputs
	The S–1000 is equipped with four HDMI™ video inputs.
Note	The S–1000 switches HDMI™ video only. Audio signal is not available via
	the HDMI™ inputs. On screen display (OSD) is not available from the
	HDMI™ output. When an HDMI™ input is assigned to a device, and the
	menu key on the remote is pressed, the on screen menu is available
	simultaneously from composite, S-video, and component OSD outputs.

Back Panel Remote Control Connections

Note

Power Connections

54Comm Port RS-232 Connector

The S–1000 is equipped with an RS-232 communication port, which sends operational instructions directly to the S–1000 using an external computer control system.

55RC-5 In

The RC-5 input makes custom installation easy and secure by accepting baseband RC-5 input commands from hardwired remote controllers.

5612 VDC In and Out

The S–1000 is equipped with four programmable 12 V outputs and one input. Each trigger sends a 12 V power on/off signal via a 12 V trigger cable to other Krell components and to other devices that incorporate 12 V power on/off trigger input. Trigger 1 is enabled for all 10 devices.

When the S–1000 is in the operational mode and a trigger is enabled, the 12 VDC Out provides 12 V of DC output. When the S–1000 is in the stand-by mode or off, or if a trigger is not enabled, the DC output is 0 V.

57DB 25 Out

The S–1000 is equipped with a multi-channel audio output via a DB-25 connector. The DB-25 contains the output connections for all the output channels (left, center, right, subwoofer, surround left, surround right, back left, and back right).

58Back Panel Power Switch

Use this switch to change the S–1000 from off to stand-by.

59IEC Connector

The S–1000 is equipped with a standard female IEC power con- nector, for use with the AC power cord.

18 Krell S–1000