Krell Industries S-1000 manual Front Panel and Remote Control Description, Functions

Front Panel and Remote Control Description

See Figures 1 and 2 on page 7

FUNCTIONS

Button = on front panel Key = on remote control Blue LED illuminated = function active, except for power/stand-by LED which illuminates red when in stand-by mode.

The S–1000 Surround Preamp/processor front panel and remote control access power on and off; input, and processing mode selec- tion; monitoring and display of processor status; and balance and volume control. For functions accessed only using the remote con- trol, see page 12.

Basic Functions

Input Device Selection

1Power Button/Pre Key

The power button or pre key switches the S–1000 from stand- by to the operational mode.

2Power/Stand-by LED

Stand-by Mode. When the AC power cord is plugged into the wall, and the back panel power switch (58) is on, the LED illu- minates in red, indicating that the component is in the stand- by mode.

Operational Mode. When the power button or pre key (1) is pressed, the LED illuminates in blue, indicating that the com- ponent is in the operational mode.

3Infrared Sensor

The infrared sensor receives commands from the S–1000 remote control. For proper remote control operation, make sure the infrared sensor is not covered or obstructed.

4Infrared Emitter

Emits the S–1000 remote operation code to a learning remote. See Program Remote, on page 51.

The S–1000 is equipped with ten input device selection buttons. If properly configured, the S–1000 automatically engages the correct video and audio inputs when you press the device selection button.

5DVD Button/Key

Press this button or key to select the digital video disc device.

6Cable Button/LD Key

Press this button or key to select the laser disc device.

7SAT Button/Key

Press this button or key to select the satellite feed device.

8VCR Button/Key

Press this button or key to select the VCR device.

8 Krell S–1000