Krell Industries S-1000 manual Choose a standard video format

System Configuration, continued

Step 2, Configure Devices

Assign Video Inputs,

continued

PREVIOUS or DISABLED

For devices that do not use a video input, for example, a CD player, there are two options: PREVIOUS or DISABLED. PREVIOUS allows the last active video input to continue to be displayed, as long as a previous selection has been made. DISABLED turns off the video outputs.

NTSC or PAL

Choose a standard video format.

OFF, MENU ONLY, or MENU AND STATUS

Select one of these options for component video inputs, based on your video source and monitor capabilities.

When using a progressive or high definition (HD) video source, select OFF or MENU ONLY in order to pass the video signal properly. The S–1000 can only display on-screen text in NTSC or PAL. If the moni- tor cannot automatically switch between progressive or HD video and standard definition (NTSC or PAL) video, you must select OFF. Then, in addition, connect the composite or S-video OSD output to the monitor, in order to disploay the setup menu.

HDMITM

Select this option for multi-channel output.

Use the enter (32) and directional (33) keys to navigate the menu and set selections.

Prev When all selections are entered, press the previous key (30) once to

return to the CONFIGURE DEVICES menu.

HOW TO NAVIGATE

IN THE MENU MODE

1Press the menu key (29) to enter and exit the menu mode from the operational mode.

2Press the direction keys (33) to scroll from line to line, and to scroll through options within a line.

3Press the enter key (32) to select and

set an option.

4Use the directional keys to scroll to the next line.

5Press the prev key (30) to return to the previous screen.

6Press the pre key (1) to exit the menu mode and place the S–1000 in the stand-by mode.

32 Krell S–1000