Acer 5737Z manual Main, Parameter Description Format/Option, Disabled

Main

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery.

						PhoenixBIOS Setup Utility
Information		Main		Advanced		Security	Boot	Exit
System Time:					[19:10:59]				Item	Specific Help
System Date:					[12/12/2008]				<Tab>, <Shift-Tab>, or
System Memory:					634 KB				<Enter> selects field.
Extended Memory:					1790 MB
Quiet Boot:					[Enabled]
Network Boot:					[Enabled]
F12 Boot Menu:					[Disabled]
D2D Recovery:					[Enabled]
SATA Mode Selection:					[AHCI]
F1	Help		Select		Item	F5/F6	Change	Values	F9	Setup	Defaults
Esc	Exit		Select		Menu	Enter	Select	Sub-Menu	F10	Save	and Exit

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter	Description	Format/Option
System Time	Sets the system time. The hours are displayed with 24-	Format: HH:MM:SS
	hour format.	(hour:minute:second)
System Date	Sets the system date.	Format MM/DD/YYYY
		(month/day/year)
System Memory	This field reports the memory size of the system.	N/A
	Memory size is fixed to 634 KB.
Extended Memory	This field reports the memory size of the system.	N/A
	Memory size is fixed to 1790 MB.
Quiet Boot	Displays the logo screen while booting.	Option: Enabled or
		Disabled
Network Boot	Enables, disables the system boot from LAN (remote	Option: Enabled or
	server).	Disabled
F12 Boot Menu	Enable the Press <F12> to display Boot Menu message	Option: Enabled or
	during boot.	Disabled
D2D Recovery	Enables, disables D2D Recovery function. The function	Option: Enabled or
	allows the user to create a hidden partition on hard disc	Disabled
	drive to store operation system and restore the system
	to factory defaults.
SATA Mode	Control the mode in which the SATA controller should	Option: AHCI or IDE
Selection	operate.

Chapter 2 25