LCD Module Reassembly Procedure
Replacing the MIC and Antennas
1.Place the Microphone Module in the LCD Module as shown.
2.Run the cable as shown and secure it using the adhesive tabs.
3.Replace the left and right antennas as shown. Ensure that the locating pin on each antenna is correctly seated. Press down on the adhesive pads (green callout) to secure the antennas in place.
Locating Pin | Locating Pin | ||
|
|
|
|
|
|
|
|
4.Replace the left antenna cable (white) as shown. Ensure that the cable is inserted along the cable channel and secured under each adhesive tab strip.
5.Ensure the antenna cable passes through the hinge well as shown to avoid trapping.
Chapter 3 | 91 |
