Superior BC-36 Fireplace Specifications, Front BC Model Shown, Left Side, Right Side, Top View

FIREPLACE SPECIFICATIONS

1-1/2"

7-1/2"(38 mm)

(191 mm)

9-5/8"

(244 mm)

1-1/2" Metal Safety Strips

27-7/8"

36"

(914 mm)

20-3/16"

(513 mm)

37"

(940 mm)

Figure 8

Blocking

(708 mm)

2"

(51 mm)

40"

(1016 mm)

43"

(1092 mm)

Front (BC Model Shown)

7-3/16"

(183 mm)

Metal Safety Strips

Figure 9

Appliance Top Spacer

Step 3. Refer to fireplace drawings and specifi- cations on pages 6 and 7 for framing dimensions and details. Frame appliance enclosure as illus- trated in Figures 11 through 14 on page 8.

IMPORTANT: UNDER NO CIRCUMSTANCES CAN THE FIREPLACE TOP SPACERS (FIGURE 10 ) BE REMOVED OR MODIFIED, NOR MAY YOU NOTCH THE HEADER TO FIT AROUND OR BE INSTALLED LOWER THAN THE SPACERS. THE HEADER MAY BE IN DIRECT CONTACT WITH THE TOP SPACERS BUT MAY NOT BE SUPPORTED BY THEM.

Gas Line

Access

20-1/4"

(514 mm)

Left Side

Combustion	9-7/8"
	(251 mm)
Air Inlet
		32"
37"	Gas Line	(813 mm)
(940 mm)	Access

		9-3/16"
			9-1/16"
17-3/8"	(233 mm)
(441 mm)				(230 mm)

12-7/8" (327 mm)

Junction

Box

Right Side

6

Note: The framed depth, 20-5/8" (524 mm) from a framed wall, must always be measured from a finished surface. If a wall covering such as drywall is to be attached to the rear wall, then the 20-5/8" (524 mm) must be measured from the drywall surface. It is important that this dimension be exact.

If the appliance is to be elevated above floor level, a solid continuous platform must be constructed.

The header may rest on the top metal spacers, but must not be notched to fit around them.

Consult all local codes.

27-1/4"

(692 mm)

7-13/16"
(198 mm)
	20-1/4"
	(514 mm)
Appliance
Top Spacer	12-1/2"
	(318 mm)
1-1/2"	40"
(38 mm)	(1016 mm)
	43"
	(1092 mm)

Top View

Figure 10

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.