Tripp Lite PDUMV30NET manual Features, Specifications, System Overview, Output, Input

Features

120V 30A maximum capacity (agency de-rated to 24 amps) Switched, Metered and Monitored Power Distribution Unit (PDU) with built-in web/network interface in 0U vertical rack form factor

Includes attached L5-30P input plug and 24 x 5-15/20R controllable outlets arranged in two 12-outlet load banks

Supports individually controllable output receptacles, current metering, network monitoring and remote control via built-in Web/network monitoring and control card

Provides the ability to turn on, turn off, recycle or lock out power to each individual PDU receptacle on a programmable or real-time basis Switchable outlets enable a number of advanced networking abilities, such as remote reboot on-demand of locked IT equipment, custom power-on/power-off outlet sequencing, automatic load shedding of optional loads during power failures and disabling unused outlets to prevent the connection of unauthorized equipment loads

Remote interface provides data regarding input power conditions, load level and individual outlet power status via secure network or web browser interface

Supports notification and logging of all major power events and user-specified alarm thresholds

Optional ENVIROSENSE temperature and humidity probe enables remote monitoring of environmental conditions and the ability to report conditions from up to two contact-closure sensors

Optional ENVIROSENSE probe also supports the connection of up to three user-supplied contact-closure sensors to selectively notify, monitor and log reported conditions, such as rack door access

DHCP/Manual configuration support enables network settings to be automatically assigned to the card, or manually assigned via permanent IP addresses

10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network

Real-time clock support maintains the time of day and date even if the PDU is shut down and unpowered

2-tier level access enables an administrator and a guest to log into the web browser for monitoring and/or management of all intelligent PDUs and similarly equipped UPS systems

Alert notifications via email or SNMP traps provide immediate event notification

Protocols supported include HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP,

BOOTP, NTP

Front panel ammeter with pushbutton toggle switch displays power consumption for all three loading segments (12 outlets in bank 1, 12 outlets in bank 2 and total load of banks 1 and 2 combined)

On initial power-up, outlets are automatically energized at 250 millisecond intervals to prevent inrush-related equipment interaction and mains circuit overloads

Each 12-outlet bank is protected by a separate 20A circuit breaker

Included cord retention brackets keep vital network equipment plugged in and continuously powered

70-in. 0U vertical rack installation supported with included rackmount brackets

Tooless mounting supported in button-mount compatible racks

Specifications

SYSTEM OVERVIEW

Voltage compatibility	120V
Frequency	50/60 Hz
compatibility
OUTPUT
Output nominal	120V
voltage
Outlet quantity / type	24 x 5-15/20R
Customized load	Each outlet is individually controllable via remote interface
management
receptacles

Overload protection

INPUT

Outlets are arranged in two separately breakered 20A banks. 12 upper outlets are protected by the upper circuit breaker; 12 lower outlets are protected by the lower circuit breaker

Maximum input amps

30A maximum (Agency de-rated to 24A continuous)

Input connection type

Attached L5-30P input plug

Input cord length

10 ft./3m