Primera Technology SE Maintenace Troubleshooting, Interpreting the PUBLISHER’S Indicator Lights

TOC INDEX

Section 5: Maintenace and

Troubleshooting

A. INTERPRETING THE PUBLISHER’S INDICATOR LIGHTS

The Power/Ink button can tell you what is happening inside the Publisher. Please refer to the following:

Power/Ink Button	Publisher
Fast Flashing	The Publisher is initializing.You will see this
	pattern when the Publisher is first turned on.
	Wait until the lights stop blinking before
	opening software or starting jobs.
Slow Flashing	The cover is open and the ink cartridge carrier
	is in change position. Insert a new cartridge
	and close the cover. (The slow flashing light
	can also indicate an out of media condition,
	a robotic error or a picking problem. However,
	these conditions are always paired with a error
	message on screen.)

B. CLEANING THE PUBLISHER

NOTE: Do NOT attempt to oil or grease the Publisher's Robotic Arm shaft or other components. You will likely cause more harm than good! Any moving parts are designed to operate for the life of the machine with no additional lubrication required.

Use a clean, lint-free rag with a small amount of ammonia window cleaner to clean the Publisher's outside case and trays. This type of cleaner is very effective on inks that may accumulate on the printer tray. Stronger cleaning solutions are NOT recommended because they may damage the paint and plastic materials from which the parts are manufactured. Always disconnect your Publisher's power cords before cleaning. Resume operation only after the surfaces are completely dry.

44Maintenance and Troubleshooting