Samsung 420 manual File name, This enables you to name files, Setup, Information

File name

This enables you to name files

1.Rotate the mode dial to SETUP mode and the [SETUP 1/3] menu will display.

2.Select [FILE NAME] menu by pressing the UP/DOWN button.

3.Press the RIGHT button and the cursor will shift to the [FILE NAME] sub menu.

4.Select the desired sub menu by pressing the UP/DOWN button and press the OK button.

[RESET]	: Using reset, the next file name will be set
	from 0001 even after formatting, deleting
	all or inserting a new memory card.
[SERIES]	: Under this system, the file name will
	directly follow the last stored file name,
	regardless of any actions such as file
	deletion or formatting.

SETUP 1/3

FORMAT	NO
FILE NAME	RESET
POWER OFF	03 MIN
LANGUAGE
	CHANGE:

SETUP 1/3

FILE NAME

RESET

SERIES

BACK:SET:OK

INFORMATION

The first stored folder name is 100SSCAM, and the first file name is S4200001. Whenever you store an image, the file number is increased by 1.

The file number is named from S4200001 to S4209999 automatically, 9999 files will be stored in a folder.

Using [SERIES], the sequence starts at 100SSCAM and increases in increments of 1.(e.g : 101SSCAM, 102SSCAM...

The files used with the memory card conform to the DCF(Design rule for Camera File system) format.

If you change the name of files that are stored on the memory, you can not play back the files on the LCD monitor of this camera.

SETUP

69