Samsung 420 manual Protect, Cancels the protect function

Protect

This is used to protect specific shots from being accidentally erased (LOCK). It also releases images that have been previously protected (UNLOCK).

1.Rotate the mode dial to the PLAY mode and press the MENU button.

2.Select the [PROTECT] menu by pressing the UP/DOWN button.

3.Press the RIGHT button and the cursor will shift to the [PROTECT] sub menu.

4.Select the desired sub menu by pressing the UP/DOWN button and press the OK button.

[ONE IMAGE] : Only an image that is displayed on the LCD monitor is protected or unprotected.

[ALL IMAGES] : All of the stored images are protected or unprotected.

5.Select the desired secondary menu by pressing the UP/DOWN button and press the OK button.

[LOCK]	: Sets up the PROTECT function.
[UNLOCK]	: Cancels the protect function.

6.If you select the[ONE IMAGE] sub menu at step 4, you can protect or unprotect another image by pressing the LEFT / RIGHT button.

7.Press the menu button and the menu will disappear. If you

protect an image, the protect icon() will be displayed on the LCD monitor. (An unprotected image has no indicator)

PLAY 1/2

SLIDE SHOW	03 SEC
PROTECT
DELETE ALL
COPY TO CARD

EXIT:MENU CHANGE:

PLAY 1/2

PROTECT

ONE IMAGE

ALL IMAGES

BACK: SET:OK

PROTECT

UNLOCK

MOVE IMAGE :

EXIT : MENU SET : OK

NOTICE

An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but will NOT be protected from the [FORMAT] function.

60