Samsung 420 manual Quality, Information, Recording, Digimax

Quality

In STILL IMAGE mode, you can select the image quality (Data compression rate).

1.Rotate the mode dial to the STILL IMAGE mode and press the MENU button.

2.Select the [QUALITY] menu by pressing the UP/DOWN button.

3.Press the RIGHT button and the cursor will shift to the [QUALITY] sub menu.

4.Select the desired sub menu by pressing the UP/DOWN button.

5.Press the OK button to confirm the setting.

6.Press the menu button and the menu display will disappear. Take a picture.

STILL IMAGE 1/2

SIZE

QUALITY

EFFECT NORMAL SHOOTING

EXIT:MENU CHANGE:

STILL IMAGE 1/2

QUALITY

SUPER FINE

FINE

NORMAL

BACK: SET:OK

RECORDING

INFORMATION

The higher the QUALITY setting, the better the final image will be. However, the high quality setting will require more memory and therefore reduce the number of images you can store on the memory.

SUPER FINE is the highest quality and NORMAL is the lowest setting. Choose the setting appropriate for your needs.

The image file is stored in *.jpg.

This file format complies with the DCF(Design rule for Camera File system).

Even if the camera should be restarted, the quality setting is maintained.

When using the 16MB internal memory, the specified shooting capacity will be as follows. (These figures are intended as an indication of expected performance)

			Digimax 420
Quality Size
Super fine	6	7	28	109
Fine	13	15	56	199
Normal	20	23	84	299

41