Manuals / Pioneer / TV and Video / DVD Player

Pioneer DV-535 specifications Rotation number of spindle motor

Models: DV-535

1 81
Download 81 pages 35.21 Kb
Page 52
Image 52

DV-535

15.Disc distinction threshold value (CD and unrecorded disc)

Threshold value of the disc distinction. Distinguish it from CD if bigger than this value, and distinguish it from an unrecorded disc if small.

16.Current jitter value

Indicate the value that was read in from the MY-CHIP in DVD, and indicate the value that was read in from the servo DSP in CD.

17.Focus balance setting value of L0

18.Focus balance setting value of L1

19.Current mechanism controller inside mode

(it does not support in this unit)

It can indicate to a maximum 10 modes. Indicate only a nest share of the mode.

20.Processing step of 11 inside modes

(it does not support in this unit)

It can grasp the current mode, the mode reaching it and transition of step by watching 19 and 20.

21.Spindle control state of MY-CHIP

(it does not support in this unit)

OFF

: Motor off condition

A/B

: Accelerator and brakes

FG

: FG servo

RVP

: Rough speed phase servo

ORVP : Rough speed phase servo of offset addition

22.Rotation number of spindle motor

Do not FG read in ? indication (during spindle stop).

23.Tracking error generation system

(it does not support in this unit) 1: 1 beam (DPD)

3: 3 beams

24.TZC count value (it does not support in this unit)

The value that counted the number of TZC for one rotation in the tracking open state.

When this value is more than 512 with CD, set it in 1 beam because the eccentric is large.

DVD does not measure it because it is 1 beam fixed (indication is 0000).

25.It indicates the frequency that entered the focus backup

Hexadecimal number indication. Counter does not reset till turns the power off after turning it on. Due to a 1 byte counter, next of FF becomes 00.

26.It indicates focus backup limit frequency with the hexadecimal number

Initial value is 14H, it does decrement whenever enter the focus backup and it gives up backup if it became 0. Then the error is generated. After reverted from the backup, When not enter the backup and pass fixed time (1500ms), return to initial value again.

27.It indicates the frequency that entered the internal circumference plunging into backup of the sled

Hexadecimal number indication. Counter does not reset till turns the power off after turning it on. Due to a 1 byte counter, next of FF becomes 00.

28.It indicates the frequency that entered the tracking overrun backup

Hexadecimal number indication. Counter does not reset till turns the power off after turning it on. Due to a 1 byte counter, next of FF becomes 00.

29.It indicates the limit frequency of tracking overrun backup with a hexadecimal number

Initial value is 03H, it does decrement whenever enter the tracking overrun backup and it gives up backup if it became 0.

30.It indicates the frequency that entered sled overrun backup

Hexadecimal number indication. Counter does not reset till turns the power off after turning it on. Due to a 1 byte counter, next of FF becomes 00.

31.It indicates the limit frequency of sled overrun backup with a hexadecimal number

Initial value is 03H, it does decrement whenever enter the sled overrun backup and it gives up backup if it became 0.

32.It indicates the frequency that entered the tracking close NG backup

Hexadecimal number indication. Counter does not reset till turns the power off after turning it on. Next of FF is be a 1 byte counter in 00.

The hexadecimal number indication which indicates the frequency that reads

33.ID/subQ, and entered NG backup

Hexadecimal number indication. A counter does not reset it till cuts it off after turning it on. Due to a 1 byte counter, next of FF becomes 00.

34.An address to indicate in 35

Set it by using RS232.I

(an address) Set it with DA.

35.Contents of an address indicated in 34.

52

Page 51 Page 53
Page 52
Image 52
Pioneer DV-535 specifications Rotation number of spindle motor
Page 51 Page 53

DV-535 specifications

The Pioneer DV-535 is a versatile and highly regarded DVD player that made its mark in the early 2000s. Known for its exceptional performance and user-friendly features, the DV-535 caters to both casual viewers and dedicated home theater enthusiasts.

One of the standout features of the Pioneer DV-535 is its compatibility with a wide range of disc formats. It supports DVD-Video, DVD-R/RW, CD, CD-R/RW, and even Video CD formats. This versatility allows users to enjoy an array of media, from movies to music CDs and homemade recordings, all from a single device. The ability to read multiple formats makes it an attractive option for users with varied collections.

The DV-535 boasts the acclaimed PureCinema technology, which enhances the playback of films. This progressive scan feature ensures that video output is smooth and clear, reducing motion artifacts that can detract from viewing quality. The player also features advanced video processing capabilities, resulting in rich colors and sharp images, which are further enhanced by its compatibility with widescreen televisions.

Another key characteristic of the DV-535 is its user-friendly interface. The remote control is ergonomically designed for ease of use, enabling quick access to essential functions. Users can easily navigate menus, access setup options, and control playback settings without hassle. The on-screen display is intuitive, making it simple for users to find and play their desired media.

In terms of audio performance, the DV-535 does not disappoint. It supports multiple audio formats, including Dolby Digital and DTS, which provides an immersive sound experience. This is especially beneficial for home theater setups, where high-quality audio is paramount.

Connectivity options on the DV-535 are robust, offering composite video, S-Video, and optical audio outputs. This range of output options makes it compatible with various audio and video equipment, enabling seamless integration into any home theater system.

In conclusion, the Pioneer DV-535 is a well-rounded DVD player that combines excellent playback capabilities, format versatility, and user-friendly features. Featuring advanced technologies like PureCinema, it ensures a superior viewing and listening experience that appeals to a wide audience. Its design prioritizes convenience while delivering high-quality performance, solidifying its reputation as a reliable choice for home entertainment.