Pioneer DV-535 specifications Stops

DV-535

FL	Description	Causes if with a DVD	Causes if with a CD	Operation of the
	of Error
39	SGC converge	SGC could not converge during detects the peak		Open
	timeout
41	Spindle timeout	The unit did not enter Stop mode within 10 seconds of issuance of a Stop command.		Stop
		The spindle could not converge into within ± 12% of
		the target FG rotation speed within 10 seconds after
	Spindle FG	spindle kick. The first time after startup (the first time
48		after disc distinction), it doesn't become the number of		Stops. (FG timeout)
	transition timeout	the target rotation within five seconds. The first time
		after startup, detects the abnormal rotation number of
		high-speed continuously 3 loops. DVD: 5 to 9 mS ,
		CD: 40 to 60 mS
	Spindle PLL	After the second times after startup, it doesn't become the number of the target rotation		Stops.
49		within five seconds. Detects the abnormal high-speed or low-speed rotations. DVD: 5 to		("73" is displayed during
	transition timeout
		9 mS , CD: 40 to 60 mS		starting process.)
4A	Spindle lock timeout	Spindle could not lock more than 1.5 seconds before start the AFB.		Stops.
				("73" is displayed during
				starting process.)
51	Auto sequence	ABUSY did not return within 1 second after the		Stop
	timeout of peak	DDTCT (peak detection) command was sent.
52	Auto sequence	ABUSY did not return within 30 mS after the FJMPD		Stop
	timeout of focus
		(Focus jump 1 to 0) command was sent.
	jump down
53	Auto sequence	ABUSY did not return within 30 mS after the FJMPU		Stop
	timeout of focus	(Focus jump 0 to 1) command was sent.
54	Auto sequence	ABUSY did not return within 50 mS after the GSUMON		Stop
	timeout of play AGC	(play-AGC-measuring) command was sent.
55	Auto sequence	ABUSY did not return within 2 seconds after the		Stop
	timeout of disc-type-
		DJSRT (disc-sensing) command was sent.
	sensing
56	Auto sequence	ABUSY did not return within 1 second after the		Stop
		TBLOFS (Internal ATB after the completion of external
	timeout of ATB2
		ATB) command was sent.
57	Auto sequence	ABUSY did not return within 500 mS after the TSON		Stop
	timeout of tracking
		(tracking servo ON) command was sent.
	servo ON
58	Auto sequence	ABUSY did not return within 200 mS after the TBL		Stop
	timeout of ATB1	(external ATB) command was sent.
59	Auto sequence	ABUSY did not return within 2 seconds after the FGN		Stop
	timeout of focus gain
		(focus gain adjustment) command was sent.
	adjustment
5A	Auto sequence	ABUSY did not return within 2 seconds after TGN		Stop
	timeout of tracking
		(tracking gain adjustment) command was sent.
	gain adjustment
5B	Auto sequence	ABUSY did not return within 1 second after the		Stop
	timeout of offset
		CMDAVE (offset adjustment) command was sent.
	adjustment
	Auto sequence	ABUSY did not return within 200 mS after the ADJMIR
5C	timeout of			Stop
		(modulation factor measurement) command was sent.
	modulation factor
	measurement
5D	Auto sequence	ABUSY did not return within 2 seconds after the AFB		Stop
	timeout of auto focus
		(auto focus bias) command was sent.
	bias
5F	Auto sequence	A command could not be sent because ABUSY was		Stop
		low. ABUSY did not return within 200 mS after TLV
	already busy
		command was sent.
62	Pause retry error	Pause mode could not be restored within three retries		Continues operation
		after it had been released.

55