Frequently asked questions
Repairs should only be carries out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage.
The burner does not ignite when the combiset is being used for the first time or after an extended period of not being used.
Possible fault | Solution |
|
|
There could be air in the gas pipe. | You may need to make several |
| attempts before the burner ignites |
| successfully. |
|
|
The On/Off and residual heat indicators are flashing.
Possible fault | Solution |
|
|
There has been a power failure. | Turn all the controls clockwise to "". |
| You can now operate the appliance as |
| normal. |
|
|
The On/Off indicator is flashing. |
|
Possible fault | Solution |
|
|
The gas supply has been | – Turn all the controls clockwise to |
| position "". You can now operate the |
| appliance as normal. |
| – If the problem persists, disconnect |
| the appliance from the electrical |
| supply for a few seconds. |
|
|
18
