Cleaning and care
Burners
The burner can be dismantled and cleaned when cool.
Remove the burner parts and wash them in a solution of warm water and liquid dish soap. Dry them thoroughly. Make sure that the flame holes are clean and completely dry.
Wipe the burner base clean with a damp cloth and then dry.
Gently wipe the ignitor and ignition safety control with a slightly damp cloth, and then wipe dry.
Make sure that no liquid gets into the appliance.
Reassembling the burner
Place the burner head onto the burner base , making sure that the thermocouple and the ignitor align through the holes in the burner head. The burner head must fit into place properly.
Place the burner cap evenly onto the burner head .
Once the burner cap is in the right position, it will not move.
Be careful not to mix up the parts.
17