Use
Turning on | Turning off |
| Turn the knob clockwise to "". |
| This stops the flow of gas and turns off |
| the combiset. |
To turn on the burner, press the control knob down to pass the resistance, then release the pressure and turn it counterclockwise to the largest flame symbol. The ignitor will "click" and ignite the gas.
If the burner does not ignite or the flame goes out, turn the control knob to "". Try again after a few seconds.
If the burner still won't ignite after the second attempt, turn the control knob to "" and see "Frequently asked questions".
Adjust the knob to the desired setting.
Regulating the burners
The burners can be variably adjusted between the lowest and highest flame by turning the control knob.
Since the outer portion of the flame is much hotter than the center, the flame should be set so that its tips do not spread beyond the sides of the pan. Flame tips which extend beyond the sides of the pan are hazardous.
On/Off indicator and Residual heat indicator
When the combiset is turned on, the On/Off indicator lights up. Once a
Do not touch or place any heat sensitive objects on the combiset while the residual heat indicator is on. Danger of damage or injury.
If the display is flashing, a fault has occurred. See "Frequently asked questions".
13