Chapter 7: BIOS
Bank Swizzle Mode
This setting Enables or Disables the bank swizzle mode.
ECC Configuration
ECC Mode
This submenu affects the DRAM scrub rate based on its setting. Options include Disabled, Basic, Good, Super, Max and User. Selecting User activates the other options for user setting.
DRAM ECC Enable
This setting allows hardware to report and correct memory errors automatically, maintaining system integrity. Options are Enabled or Disabled. This is option is only active if ECC Mode above is set to User.
DRAM Timing Configuration
DRAM Timing Config
This option allows you to set the DRAM timing configuration for the system. Options include Auto or Manual.
Memory Timing Parameters
This selects the which node's timing parameters to display. Options are CPU Node 0 or CPU Node 1.
IOMMU
This setting is used to enable or disable or set the GART size in systems without AGP. Options include Enabled and Disabled.
OHCI/EHCI HC Device Functions
These settings allow you to either Enable or Disable functions for OHCI or EHCI bus devices.
USB 2.0 Controller Mode
Use this setting to configure the USB 2.0 Controller in either
