A+ SERVER 1022G-UTF User's Manual
5-6 Adding PCI Cards
PCI Expansion Slots
A riser card is used to support an add-on card to the system and comes pre- installed.
Installing a PCI Expansion Card
1.Remove the chassis cover.
2.Install the riser card by sliding card into the appropriate slot in the mother- board.
3.Choose the PCI slot shield in which to place the add-on card.
4.In that slot, open the PCI slot shield lever and slide the shield sideways.
5.From inside the chassis, remove the PCI slot shield.
6.Slide the add-on card into the riser card and attach the add-on card bracket in place of the PCI slot shield.
7.Secure the add-on card by closing the PCI slot shield lever.
8.Connect cables to the add-on card as necessary.
Note: If the left side riser is with 2 or more x8 PCI-E slots make sure an installed card on the left side riser is detected. If it is not, then go to the system’s BIOS Setup and in Advanced/ PCI/PnP Configuration /SXB1 Configuration BIOS setting select the [2x8] option. Then save the BIOS setting changes and reboot the system.
