SUPER MICRO Computer 1022G-URF user manual Installing the System into a Rack

A+ SERVER 1022G-URF User's Manual

2-5 Installing the System into a Rack

This section provides information on installing the 1022G-URF into a rack unit with the rack rails provided. If the system has already been mounted into a rack, you can skip ahead to Sections 2-6 and 2-7.

There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that

came with the rack unit you are using.

Identifying the Sections of the Rack Rails

You should have received two rack rail assemblies in the rack mounting kit. Each assembly consists of two sections: an inner fixed chassis rail that secures directly to the server chassis and an outer fixed rack rail that secures directly to the rack itself (see Figure 2-1). Two pairs of short brackets to be used on the front side of the outer rails are also included.

Both the inner rails have been pre-attached to the chassis.

Figure 2-1. Identifying the Sections of the Rack Rails

(right side rail shown)

2-4