Belkin F1DW216 user manual DIP Switch Configuration Chart, Example, Installation Before you begin

INSTALLATION

DIP Switch Configuration Chart

	DIP SWITCH #			BANK ADDRESS
1	2	3	4
DOWN	DOWN	DOWN	DOWN	BANK 00 (Default)
UP	DOWN	DOWN	DOWN	BANK 01 PRIMARY/SECONDARY
DOWN	UP	DOWN	DOWN	BANK 02 SECONDARY
UP	UP	DOWN	DOWN	BANK 03 SECONDARY
DOWN	DOWN	UP	DOWN	BANK 04 SECONDARY
UP	DOWN	UP	DOWN	BANK 05 SECONDARY
DOWN	UP	UP	DOWN	BANK 06 SECONDARY
UP	UP	UP	DOWN	BANK 07 SECONDARY
DOWN	DOWN	DOWN	UP	BANK 08 SECONDARY
UP	DOWN	DOWN	UP	BANK 09 SECONDARY
DOWN	UP	DOWN	UP	BANK 10 SECONDARY
UP	UP	DOWN	UP	BANK 11 SECONDARY
DOWN	DOWN	UP	UP	BANK 12 SECONDARY
UP	DOWN	UP	UP	BANK 13 SECONDARY
DOWN	UP	UP	UP	BANK 14 SECONDARY
UP	UP	UP	UP	BANK 15 SECONDARY

Example:

Four OmniView ENTERPRISE Quad-Bus Series KVM Switches (F1DW216C) are daisy-chained together to control 64 computers. The DIP switch on the primary units are set to “BANK Address 00” and “BANK Address 01” and the secondary units are each set to a unique BANK address between 02 and 15 (BANK 00 needs to be configured for daisy-chain operation, as noted above).

Installation

Before you begin:

1.Make sure that all computers and switches are powered off and that each Switch has been assigned a unique BANK address.

2.Place primary and secondary Switches in the desired locations.

13