USING YOUR SWITCH
•Pressing the space bar will activate IntelliView control in focus (same as clicking on the control). If the list box is in focus, then pressing the space bar gives the console control of the highlighted computer.
•Pressing “Enter” activates the control in focus, if the control is on a button, or inside an edit box, but if the focus is on another type of control (e.g. the list box), the Enter key activates the default control (Close or Exit, depending on the current IntelliView screen).
•If the administrator presses “Ctrl + TAB” while viewing one of the Setup pages, IntelliView goes to the next page.
•Shortcut keys are enabled in IntelliView. For example, pressing “ALT + X”, where X corresponds to the underlined character in a control’s label, activates that control.
•When IntelliView is up, keyboard and mouse input is routed directly to it; their signals are not sent to the computer.
•Selecting the “Close” button, pressing “ALT + C”, or pressing ESC on any of the Setup pages will return the user to the Main page.
•The TAB key can be used to cycle through the controls on the current IntelliView page. Shift+TAB will cycle backwards.
•The IntelliView window can be repositioned by clicking on the title bar and dragging the window with the mouse.
•To reposition the banner, press and hold “Ctrl + Alt” while IntelliView is up; the cursor jumps from the IntelliView window to the banner; clicking and dragging the mouse will allow the user to reposition the banner.
•The Switch maintains the position settings of IntelliView and the banner for multiple computer video resolutions. The user should set the positions of the IntelliView and banner windows during the Switch setup to make the locations identical for all video resolutions.
Note: IntelliView does not turn off by itself. To reduce the risk of burning IntelliView on the monitor, turn off the monitor, set the KVM Switch to AutoScan Mode, or manually turn off IntelliView.
22
