Tektronix 071-0590-00 user manual Printenable onoff, Printenable?, Printport parallel gpib serial

Remote Commands

PRINT Setup Commands

print_enable [onoff]

Print Enable. This command turns the "master" Analyzer Print Enable parameter on or off. When Print Enable is off, then no reports will be printed. When Print Enable is on, then all enabled reports will be printed. Remember that individual reports will not print unless they are enabled individually and Print Enable has been set to "on".

Min. Abbr.	print_e
Arguments	on	enabled reports will print.
	off	no reports will print
Example	print_enable on

print_enable?

Print Enable Query. Returns the current state of the Print Enable parameter.

Min. Abbr.	print_e?
Returns	[onoff]
Example	print_enable?	(command)
	PRINT_ENABLE ON	(response)

print_port [ parallel gpib serial ]

Print Port. This command selects the port on which all Analyzer reports will be printed.

Min. Abbr.	print_p
Arguments	parallel	selects the rear-panel "PRINTER" port
	gpib	selects the rear-panel "GPIB" (IEEE-488) port.
	serial	selects the rear-panel "RS-232C" port.
Example	print_port parallel

C-84 GB1400 User Manual