Tektronix 071-0590-00 user manual Recallword m, Saveword m, Wordbits l, b1 b2

Remote Commands

recall_word [m]

Recall Word. Causes the instrument to recall the word pattern saved at location "m" and make this pattern the current word pattern and the active pattern.

Min. Abbr.	recall_w
Arguments	m:	0, 1, ..., 9
Example	recall_word 5

save_word [m]

Save Word. Causes the instrument to save the current word pattern to word memory location "m".

Min. Abbr.	save_w
Arguments	m:	0, 1, ..., 9
Example	save_word 5

word_bits [l], [b1 b2]

Word Bits. Returns the programmable WORD pattern. The response will contain the pattern length and data bytes. Sets current word length to l bits, and sets the current word pattern to the bit sequence represented by b1 and b2.

Min. Abbr.	word_b
Arguments	l:	8 or 16.
	b1:	#00 to #FF	(hexadecimal)
		#Q000 to #Q377	(octal)
		#B00000000 to #B11111111	(binary)
	b2:	same as b1. b2 is allowed only if l (length) is set to 16
Example	word_bits 16, #B10101010, #B11110000

GB1400 User Manual C-21