Tektronix 071-0590-00 user manual Minimum Requirements, List of Features

Pattern Editing Software

Minimum Requirements:

Microsoft Windows 3.1 or later running on a 386 or faster machine with 4 Mb of memory, For reasonable speed, a 486 DX or DX2 with at least 8 Mb of memory.

At least 2 Mb of free hard disk space.

gB700 Tx or Rx with 128K memory.

gB1400/1600 Tx or Rx with at least 256K memory.

A PB200.

One free RS-232 port or a National Instruments GPIB card with associated driver and software.

List of Features

∙Editing capability in excess of 1 Mb. File size is in increments of 1 bit.

∙Files can be displayed, edited, and saved in Hex, Decimal, Octal, or Binary formats.

∙Data can be saved or displayed LSB (Least Significant Bit) or MSB (Most Significant Bit) first.

∙Files saved in one format can be converted to any of the other three formats.

∙Multiple editing windows can be open simultaneously to allow working on several files at once.

∙The editor runs under Microsoft Windows with full Windows printing capability.

∙Extensive built-in help.

∙Data can be uploaded to a gB700/1400/1600 Tx or Rx via RS-232 or GPIB.

∙Uploaded data can be saved in any memory location for any memory configuration, even while the instrument is performing tests.

∙Data can be downloaded from a gB700/1400 Tx or Rx via RS-232 or GPIB. Downloaded data can be saved to disk for safe keeping or later editing, even while the instrument is performing tests.

∙Data can be saved to disk and read from disk in a format compatible with the PB200, both current single file per disk and future multiple files per disk formats.

∙The editor has full cut, paste, and copy facilities along with a last action delete UNDO.

∙The editor has full find and replace functions.

∙Replaced data can be a different length than the data it is replacing.

What the editor cannot do:

H-2 GB1400 User Manual