Tektronix 071-0590-00 Audioratup and audioratdn, Audioratup v and audioratdn, Audiorate

Remote Commands

Audio Beeper Setup Commands

audio_rat_up and audio_rat_dn

Audio Rate Up/Down (Default). This command pair is used to increment

(audio_rat_up) or decrement (audio_rat_dn) by one the exponent of the current error rate threshold of the BER beeper.

Min. Abbr.	audio_rat_u
	audio_rat_d
Arguments	none
Example	audio_rat_up
	This command adds one to the exponent of the beeper BER
	threshold.

audio_rat_up [v] and audio_rat_dn [v]

Audio Rate Up/Down. This command pair is used to increment (audio_rat_up) or decrement (audio_rat_dn) the exponent of the error beeper BER threshold by an amount v. Note that because the exponent is negative, the audio_rat_up command decreases the BER threshold while audio_rat_dn increases the threshold.

Min. Abbr.	audio_rat_u
	audio_rat_d
Arguments	v:	1, 2, 3, ..., 14.
Example	audio_rat_up 9
	The above example adds 9 to the exponent, for example changing
	the audio rate threshold from 1 x 10-3to 1 x 10-12.

audio_rate [v]

Audio Rate. Sets the BER threshold for the error beeper to 1 x 10-v.

Min. Abbr.	audio_rate
Arguments	v:	2, 3, ..., 16
Example	audio_rate 9

C-86 GB1400 User Manual