Tektronix 071-0590-00 user manual Setup for Functional Test of Standard Instrument

Performance Verification

gigaBERT-1400 TRANSMITTER

OUTPUT

Clock

Not Clock

Data

Not Data

DATA THRESHOLD (on rear panel)

gigaBERT-1400 RECEIVER

Not Clock

Clock

Data

Not Data

Figure 1 -- Setup for Functional Test of Standard Instrument

qStep 4: At the Generator, verify that PRBS is selected (the PRBS LED light, in the PATTERN, section, should be on.) If not, press the ‘PRBS’ key to select it.

qStep 5: At the Analyzer, press the ‘CLEAR’ key in the ERROR DETECTION section and the ‘CLEAR’ key in the ERROR HISTORY section to clear the error display and the error history LED lights. All four history LEDs should be off.

Because the Analyzer defaults to Autosearch mode, the Analyzer and the Generator are now linked and synchronized. The following checks will confirm the functionality of the units.

E-4 GB1400 Acceptance Test