Tektronix 071-0590-00 user manual Tst?, Wai, Tse v Analyzer Only, Tse? Analyzer Only

Remote Commands

*tst?

Self Test. Causes the instrument to perform a self test and return the result. A result of 0 means the self test was successful. A return of any other value means the self test was not successful. The GB1400 self test is limited in scope.

Min. Abbr.	*tst?
Returns	0	(if successful)
Example	*tst?	(command)
	0	(indicates successful self test)

*wai

Wait. This command forces the instrument to stop processing any additional commands until all pending operations are completed.

Min. Abbr. *wai

tse [v] (Analyzer Only)

Test Status Enable . This command sets the Test Status Enable Register to the bit sequence corresponding to v, where v is a decimal number in the range 0 to 255.

Min. Abbr.	tse
Argument	n:	<NR1>, in the range 0 to 255.
Example	tse 255
	(sets the TSR to 11111111 binary)

tse? (Analyzer Only)

Test Status Enable (Register) Query. This command returns a decimal number representing the current contents of the Test Status Enable Register (TSER).

Min. Abbr.	tse?
Returns	<NR1>, in the range 0 to 255.
Example	tse?	(command)
	TSE 255	(response)

GB1400 User Manual C-17