Tektronix 071-0590-00 user manual Generator Output Section

Functional Overview

Generator OUTPUT Section

The controls shown below are used to set up the Generator's clock and data outputs.

OUTPUT

CLOCK DATA

OFFSET

AMPLITUDE

INVERT DATA (D-INV)

∙CLOCK: Use this key to select clock amplitude and offset set up mode.

∙DATA: Use this key to select data amplitude and offset set up mode.

∙AMPLITUDE (− ,↓ ): Use these up/down keys to adjust clock or data output amplitude.

∙BASELINE OFFSET (− ,↓ ): Use these up/down keys to adjust clock or data baseline offset.

∙INVERT DATA: Use this key to toggle between output data inverted (LED on) and non-inverted (LED off) mode.

GB1400 User Manual 2-11