Tektronix 071-0590-00 user manual Editbegin n

Remote Commands

edit_begin [n]

Edit Begin. You must issue this command to the instrument before starting an editing session. In effect this command loads the contents of a word memory location specified by n into a scratch pad memory location. Once in the scratch pad memory it can be edited, uploaded to the controller, or saved to the same or a different memory location. You also must issue the edit_begin command before downloading a word pattern to the instrument.

Min. Abbr.	edit_b
Arguments	n <NR1>, a decimal number in the range -1 to 9, where -1
	indicates the current word pattern and 0 through 9 indicate the
	memory locations.
	-1 only (1M and 512K modes)
	-1 to 2 (256K mode)
	-1 to 5 (128K mode)
	-1 to 9 (64K mode)
Example	edit_begin 2

C-100 GB1400 User Manual