Tektronix 071-0590-00 Clockampup v and clockampdn, Clockampl?, Clockoffup and clockoffdn

Remote Commands

clock_amp_up [v] and clock_amp_dn [v]

Clock Amplitude Up/Down. This command pair is used to increment or decrement the current clock amplitude by specified amount of [v] volts.

Min. Abbr.	clock_amp_u
	clock_amp_d
Arguments	v:	<NR2>, in range 0.05 to 1.50 in steps of 0.05.
Example	clock_amp_up 0.05
	clock_amp_dn 0.05.

clock_ampl [v]

Clock Amplitude. This command sets the output clock amplitude to [v] volts.

Min. Abbr.	clock_ampl
Arguments	v	<NR2>, in the range 0.50 to 2.00 in steps of 0.05
Example	clock_amplitude 2.00

clock_ampl?

Clock Amplitude Query. Returns the current output clock amplitude setting.

Min. Abbr.	clock_ampl?
Response:	<NR2>
Example:	clock_ampl?	(command)
	CLOCK_AMPL 1.40

clock_off_up and clock_off_dn

Clock Offset Up, Clock Offset Down (Default). This command pair is used to increment or decrement the current output clock signal baseline offset by a default value of 0.05 volts.

Min. Abbr.	clock_off_u
	clock_off_d
Arguments	none

GB1400 User Manual C-41