Tektronix 071-0590-00 user manual Command Examples

Remote Commands

Command Examples

The following are some typical GB1400 set and query command examples:

Command	Action or Response
clock_freq?	Returns the current output clock frequency setup of
	the Generator or the measured input clock frequency
	of the Analyzer
word_memory?	Returns the saved word patterns in all 10 word
	memory locations.
word_memory? 7	Returns the saved word pattern in word memory
	location 7.
word memory 9, 16, #Haa, #H23	Sets the 16 bits of the word pattern stored at location
	9 to the bit sequence represented by AA23
	hexadecimal.
word_bits 8, #Q307	Sets the first eight bits of the current active pattern to
	the bit sequence represented by 307 octal.
recall_word 7	Recalls the word pattern saved in location 7 and
	makes it the current active pattern.
word_mem_len 6 , 16	Sets the length of the word pattern stored in location
	6 to 16 bits.
view_angle?	Returns the current display view angle setup.
view_angle 3	Sets the view angle to 3.
rs_prompt "700"	Sets the terminal display prompt to "700".
all_mem?	Returns the word patterns saved in all 10 word
	memory locations.

C-6 GB1400 User Manual