Tektronix 071-0590-00 user manual Testdiscard, Testlength t, Testlength?

Remote Commands

TEST Setup Commands

test_discard

Test Discard. This command discards all results from the previous test interval, making previous results unavailable until the next test state RUN to STOP transition occurs.

Min. Abbr. test_d

Arguments none

Exampletest_discard

test_length [t]

Test Length. Sets the test length to the time specified in the string "s". The string will be in 24-hour format "HH:MM:SS" enclosed in single or double quotes. This command sets the timed test interval. This interval will be in effect only when the test mode is timed or repeat.

Min. Abbr.	test_l
Arguments	t <qstring>, in format "hh:mm:ss", where hh = hours
	(0 to 24) mm = minutes (0 to 59), ss = seconds (0 to 59).
Example	test_length "02:00:00"

test_length?

Test Length Query. Returns the current value of the timed test length parameter.

Min. Abbr.	test_l?
Returns	<qstring>, in format "hh:mm:ss"
Example	test_length?	(command)
	TEST_LENGTH "02:00:00"	(response)

C-74 GB1400 User Manual