Tektronix 071-0590-00 Instrument Connections and Controls, Setup units with default settings

Tutorial

Instrument Connections and Controls

DATA

CLOCK

CLOCK

CLOCK

Data Threshold connection (required for single-ended signals)

GB1400 Analyzer (Receiver)

GB1400 Generator (Transmitter)

DATA

DATA

1.Setup units with default settings

Note: Resetting the unit to factory defaults is used infrequently. It helps simplify instructions on this beginners lab. A customer would not normally do this as they would lose their stored setups.

To reset the units to their factory default setting, you must hold down three separate keys while turning on the front panel power switch. Power the Generator while pressing and holding its VIEW ANGLE, MSB 1 and (PATTERN) CLEAR keys simultaneously. Release the key after the message Default Settings appears in the display. Repeat this procedure with the Analyzer. This will force both the Generator and Analyzer to power up using factory default settings.

GB1400 User Manual 2-31