D

OK / Input Source

Select

Use this button to select the input source or select an OSD menu option.

Use the Input source button to select one of the two different video signals that may be connected to your monitor:

VGA input

DVI-D input

If both VGA and DVI cables are connected to one Computer, this monitor displays an image automatically as long as a video signal is present in either VGA or DVI outputs. On a display connected to two Computers, set equal time for both screen savers. The video input from the movement of the first mouse will activate the display.

As you cycle through the inputs, the following messages appear to indicate currently selected input source. It may take 1 or 2 seconds for the image to appear.

or

or

If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.

or

E

Use the Power button to turn the monitor on and off.

The blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.

Power button (with power light indicator)

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.

1.Push the MENU button to launch the OSD menu and display the main menu.

Main Menu for Analog (VGA) Input

Page 15
Image 15
Dell E2209WC, E2009W, E2209WF Using the On-Screen Display OSD Menu, Accessing the Menu System, OK / Input Source Select