Tektronix 071-0590-00 user manual Editcntrl?, Editend n

Remote Commands

edit_cntrl?

Edit Control Query. This command returns a character string that indicates whether or not a long-word (1 MB Option) editing session is in progress and if that session is under local or remote control.

Min. Abbr.	edit_c
Returns	[localremotenone], where:
	local:	indicates a long-word editing session is in
		progress under local (front panel) control
	remote:	indicates a long-word editing session is in
		progress under remote (RS-232C or GPIB)
		control
	none:	indicates that there is no long-word editing
		session in progress
Example	edit_cntrl?		(command)
	EDIT_CNTRL NONE		(response)

edit_end [n]

Edit End. You must issue this command to finish a 1 MB word editing session. This command either moves the edited pattern from scratchpad memory to the current word location, or saves the edited pattern into one of the instruments eight word memory locations. You can also use this command to discard the edit pattern.

Min. Abbr.	edit_e
Arguments n	<NR1>, a decimal number in the range -2 to 9, where -2 discards
	the edited pattern, -1 copies the edited pattern to the current
	word location, and 0 through 9 saves the edited pattern to the
	indicated memory location.
	-1 only (1M and 512K modes)
	-2 to 2 (256K mode)
	-2 to 5 (128K mode)
	-2 to 9 (64K mode)
Example	edit_end -1

GB1400 User Manual C-101