Tektronix 071-0590-00 user manual F1ESC F4SET Reports on = EOT/ERROR

Reference

F1:ESC F4:SET

TEST MODE = TIMED

8.As before, to lock in this setup change and return to the TEST Menu, press the F4 key and see:

F1 F2 F3 F4

MORE LENGTH MODE REPORT

9.The last function we'll perform in this example is to enable End-of-Test and On-Error reports. To do this select the REPORT function by pressing F4 and see:

F1:ESC F4:SET

REPORTS ON = NONE

10.Now press the pattern up key three times to select EOT/ERROR which will enable both End-of-Test and On-Error reports. The REPORT function should now look like the following:

F1:ESC F4:SET

REPORTS ON = EOT/ERROR

11. To lock in this change and return to the TEST Menu, press F4:

F1 F2 F3 F4

MORE LENGTH MODE REPORT

12.Since all of the setup goals have been accomplished, we now want to exit the Analyzer Menu system. To do this from the TEST Menu, or from any Menu, simply keep pressing the F1 key until the normal display appears. In this example you would see the following:

a.Press F1 and see the second page of the TEST Menu .

b.Press F1 a second time and see the third page of the TEST Menu.

c.Press F1 a third time and see the first page of the main Menu again.

d.Press F1 a fourth time to see the second page of the main Menu.

e.Press F1 a fifth time and see the third page of the main Menu.

f.Press F1 a sixth time to exit the Menu system and see the normal Analyzer display format.

3-50 GB1400 User Manual