Tektronix 071-0590-00 user manual Example Analyzer Setup Report

Reference

Analyzer Setup Report

Press the F4 key at any time to print an immediate report listing the current setup of the Analyzer. This function is not available while the Analyzer is in the Menu mode. An example Setup Report is shown below.

Example Analyzer Setup Report

****Tektronix, Inc. GB-1400 Jun/14/99 02:14:29

AUTO_SET AUTO DATA_DELAY 1.800E-9 DATA_THRES 0.05 RDATA_DELAY 0.000E-9 RDATA_THRES -1.50

DATA_TERM GND CLOCK_TERM GND RDATA_TERM GND TEST_LENGTH "00:00:30"

TEST_MODE TIMED TEST_PREV PRE TEST_REP ON_ERR TEST_STATE STOP TEST_SQUELCH OFF TEST_THRES OFF WIN_MODE SEC WIN_PREV CUR WIN_REP OFF WIN_BIT_LEN 09 WIN_SEC_LEN "00:00:01"

PRINT_ENABLE ON PRINT_PORT PARALLEL AUDIO_VOL 0 AUDIO_RATE 3 PRBS_LENGTH 23 WORD_BITS 16, #HAA, #H55

DATA_PATTERN WORD DATA_INVERT ON WORD_MEMORY 0, 16, #HAA, #H55 WORD_MEMORY 1, 16, #HAA, #H55 WORD_MEMORY 2, 16, #HAA, #H55 WORD_MEMORY 3, 16, #HAA, #H55 WORD_MEMORY 4, 16, #HAA, #H55 WORD_MEMORY 5, 16, #HAA, #H55 WORD_MEMORY 6, 16, #HAA, #H55 WORD_MEMORY 7, 16, #HAA, #H55 WORD_MEMORY 8, 16, #HAA, #H55 WORD_MEMORY 9, 16, #HAA, #H55

VIEW_ANGLE 0 GPIB_ADDRESS 14 GPIB_BUS OFF_BUS

3-38 GB1400 User Manual