Panasonic HC-X900M 155, Recognized, ≥ Remote Control of the Setup is OFF. l, Remote control does

	Others
Problem	Check points
If the SD card is inserted	≥ If the SD card is formatted on a PC, it may not be
in this unit, it is not	recognized by this unit. Use this unit to format SD cards.
recognized.	(l 50)
HC-X900M	≥ [REMOTE CONTROL] of the [SETUP] is [OFF]. (l 52)
The remote control does	≥ The button-type battery of the remote control may be run
not function.	out. Replace it with a new button-type battery. (l 52)

∫If AVCHD scenes do not change smoothly when played back on

another device

The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit.

≥Just how smoothly the scenes will be played back depends on the playback unit. Depending on the unit used, the images may stop moving and become still for a moment even when none of the following conditions are applicable.

≥A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every 4 GB of data when played back with another device.

≥It may not play back smoothly when the editing of scenes was done with the HD Writer AE 4.1, but it will play back smoothly if you set the seamless settings in the HD Writer AE 4.1. Refer to the operating instructions for the HD Writer AE 4.1.

Principal reasons for not playing back smoothly

≥When the scenes were recorded on different dates

≥When scenes lasting under 3 seconds have been recorded

≥When PRE-REC was used for recording

≥When the Interval Recording is used

≥When deleting scenes

≥When selected scenes are copied to a disc in a connected DVD burner

≥When scenes recorded more than 99 scenes on the same date

≥HC-X900M

When selected scenes are copied between an SD card and the built-in memory

155

VQT4C76