Panasonic HC-X900M Touch Recorder on the screen of this unit, Touch the media you wish to dub

2 Touch [RECORDER] on the screen of this unit.

≥When you select an option other than [RECORDER], reconnect the USB cable.

≥HC-X800

When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on.

3 HC-X900M

Touch the media you wish to dub.

≥When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on.

4 Dubbing through operations on the Blu-ray disc recorder or high- definition (AVCHD) compatible DVD recorder.

≥HC-X900M

Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.

About the screen indication of the unit

≥When the unit is accessing the SD card, card access icon ( ) appears on the unit screen or the access lamp is on.

≥HC-X900M

When the unit is accessing the built-in memory, built-in memory access icon ( ) appears on the unit screen or the access lamp is on.

≥Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing the media, as this may result in the loss of recorded content.

≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

≥For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc recorder or DVD recorder.

≥When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appear on the television connected to the Blu-ray disc recorder. In this case as well, perform the operations of Steps 1 to 4.

≥You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray disc recorder or DVD recorder. Disconnect the USB cable before performing either of these operations.

≥If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder to cancel the dubbing.

131

VQT4C76